
The mower is designed with a simple parallelogram slewing. During transport to the mowing job the mower deck should be pivoted to just behind the tractor and locked with the flat iron holder.
During the mowing job the mower deck should be pivoted to the side and locked with the flat iron holder again.
No V-belts are installed in this mower, as these would wear out very quickly.
The standard scope of delivery includes 2 cardan shafts: one from the tractor to the gearbox and a second with freewheel from the gearbox to the mower.
This rotary mowers are manufactured since 20 years by Italian manufacturer and sold throughout Europe.
This rotary mower is especially suitable for small and twisty areas, because it is compact and manoeuvrable.
We sell these devices since 1997 in the wholesale and retail trade and have had only good experiences.
The tractor should have a rear three-point hitch KATI and a standard PTO 1 3/8 540rpm clockwise.
We guarantee a serious carrying out. You have a full right of return.
Specification
- 135 cm working width
- for tractors from 18 hp
- 2 the mower drums with 3 knives driven via an oil bath gearbox
- solid construction
- 225 kg net weight
- Dimensions (LxWxH) in cm: 170 x 145 x 63 cm
- Packaging dimensions in a transport iron frame (LxWxH) in cm: 140 cm x 101 cm x 50 cm
These mowers are designed especially for small tractors.
A freewheel is already built into the transmission or the PTO, depending on edition.
This means that if you turn off the mower deck the mower drums can taper off rotation by the freewheel without rotation of the PTO shaft or the gear is damaged.
No matter how small your tractor is - when you use the 1st mowing gear and a small group, then you can use the mower deck even with a grass height of 1 meter.
But for that your tractor should move with step speed.


mowing position

transport position

Here you can see the mower in the transport position. The propeller shaft is mounted on the holder.

Standard PTO shaft from tractor to mower

Holding foot for the transport position

PTO shaft with freewheel to the gearbox mower

3 blades per drum
ATTENTION!
Please shorten the PTO shaft to required length.