English Deutsch

Shredder Shredder H18H Wood chipper Shredder for tractors Compact tractors

Shredder Shredder H18H Wood chipper Shredder for tractors Compact tractors
Product no.: H18H

1.850,00 EUR   19 % VAT incl.

Shipping inside Germany: 150,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Shredder Shredder H18H Wood chipper Shredder for tractors Compact tractors

The compact tractor should have a rear three-point hitch KAT 1 or KAT 2 and a standard PTO with 540 rev / min clockwise.

This H18H is equipped with a sturdy blade on which 4 chopper knives are mounted.

It can be chopped green, fresh branches with a thickness up to 15 cm and dry wood up to a branch thickness of 10 cm.

The metering disc has a diameter of 60 cm and is electronically balanced.

The blade is a whopping 2 cm thick.

The knives are sharpened on the sides and can be turned.

The shredder is sturdily built.

The knife shaft is driven directly by the PTO shaft.

At the other end of the knife shaft, a hydraulic pump is mounted.

The drives the height-adjustable feed rollers.

The feed roller can be set by means of a safety lever to retract, return or safety stop.

The speed of the feed roller can be controlled steplessly by means of the control valve.

The standard PTO shaft is included in the standard scope of delivery.

The shredder has a completely own hydraulic system.

However you must fill up the hydraulic oil yourself (HLP46).

There are no V-belts installed.

Recommendation: Use PTO shaft with shear pin.


We guarantee a serious transaction - you have full right of return.


Technische Daten

  • Powered by the PTO shaft of the tractor at a PTO speed of 540 U / min.
  • Funnel opening: 60 x 60 cm
  • 600 mm diameter chopping disc
  • Max. Diameter of the shredded material: fresh wood 15 cm; Dry wood 10 cm
  • Ejector tube adjustable on both sides
  • 4 chopping blades
  • Weight: 280 kg
  • Dimensions (L x W x H) in ready to use condition: 1.80 m x 1.00 m x 1.65 m




Look in the funnel

(1) Feed roller steplessly hydraulically adjustable; (2) Tension spring for the feed roller

(1) reversible blades; (2) lubricating bearings; (3) hydraulic pump; (4) stop bolts

(1) height-adjustable stand; (2) oil tank


ATTENTION!
Please shorten the PTO shaft to the appropriate length.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

PTO shaft for tractors up to 50PS 120cm to 175cm

PTO shaft for tractors up to 50PS 120cm to 175cm

120,00 EUR (19 % VAT incl. * Shipping information)
PTO PTO shaft with shear bolt for tractors up to 25hp 160cm to 255cm

PTO PTO shaft with shear bolt for tractors up to 25hp 160cm to 255cm

130,00 EUR (19 % VAT incl. * Shipping information)
PTO drive shaft with slip clutch for tractors up to 35PS 120cm to 170cm

PTO drive shaft with slip clutch for tractors up to 35PS 120cm to 170cm

140,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

PTO PTO shaft with shear bolt for tractors up to 25hp 160cm to 255cm

PTO PTO shaft with shear bolt for tractors up to 25hp 160cm to 255cm

130,00 EUR (19 % VAT incl. * Shipping information)
Compact tractor Kubota B1400 4WD used, overhauled and repainted with new snow plow 140 cm

Compact tractor Kubota B1400 4WD used, overhauled and repainted with new snow plow 140 cm

5.090,00 EUR (19 % VAT incl. * Shipping information)
trailer hitch combi coupling hitch for Kubota B6001 B7000 B7001 B1200 B1400 B1402 B1500 B1502

trailer hitch combi coupling hitch for Kubota B6001 B7000 B7001 B1200 B1400 B1402 B1500 B1502

150,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage KAT1 for small tractors

Three-point linkage KAT1 for small tractors

99,00 EUR (19 % VAT incl. * Shipping information)
6 tine grubber cultivator 120cm for tractors

6 tine grubber cultivator 120cm for tractors

250,00 EUR (19 % VAT incl. * Shipping information)
mounted half-turn plough / single-furrow plough PF27 for tractors

mounted half-turn plough / single-furrow plough PF27 for tractors

450,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.421s