English Deutsch

Slope mower BML180Profi Slope mulcher heavy version for tractors

Slope mower BML180Profi Slope mulcher heavy version for tractors
Product no.: BML180

2.100,00 EUR   19 % VAT incl.

Shipping inside Germany: 150,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

Light rusting and abrasions!

Slope mower BML180Profi Slope mulcher heavy version for tractors Item is temporarily not available!

This mower is suitable for tractors from 70PS. Of course a stronger tractor can be used.

The tractor must have 2x flow and return, so two double-acting control valves should exist to realize pivoting and side shift.

The deck fits on tractors that have a rear three point linkage KatII.

The PTO shaft is included.

The transmission has a freewheel, so the balanced flail shaft can run out without problems.

The flail mower comes standard with hammer flails.

Embankments, surfaces, ditches and slopes to be mowed because of lateral displacing. The working angle is + 90 ° to -65 °.

The rear roller is greasable.

The galvanized sheet metal lamellas suspended at the front of the mower have a protective function against the escape of stones and other stuff lying in the meadow.

In this device a specially reinforced transmission is installed.

The flail mower is driven via 3 V-belts by transmission.

We guarantee a serious carrying out. You have a full right of return.

• 180 cm working width
• 16 hammer blades
• + 90 ° to -55 ° working range
• 590 kg in weight
• Drive performance from 70PS
• PTO speed 540 rpm
• parking supports

Important: oil is not filled in the transmission. It is gear oil 85W90 to use.

tilt up to 90 °

 Video of the smaller device:

The diameter of the roller is 16cm.


lubrication nipples



Pivoting arms and main pivot bolt are greaseable by means of a grease/lubrication nipple.

material thickness: 6mm

(1) Pivot arm with parking supports
2x flow and return

Please shorten the PTO shaft to required length.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.286s