English Deutsch

excavator earthmover digger backhoe HB15 rear actor for tractor three point linkage

excavator earthmover digger backhoe HB15 rear actor for tractor three point linkage
Product no.: HB15

2.999,00 EUR   19 % VAT incl.

Shipping inside Germany: 120,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

 3 years MGF warranty for private users.


excavator earthmover digger backhoe HB15 rear actor for tractor three point linkage


Due to the absolutely stable processing we offer lifetime warranty against bending of the excavator arms. In case of damage we will send free the relevant arm.


This is a very solid Backhoe - the material has not been saved. These excavators we sell since 2008.

Important!!! Each of our rear dredges has a three-point stiffening as standard! The rear dredger is thus firmly connected to the tractor. That is, lifting or lowering with the rear three-point lifting is no longer possible. It would be due to the dead weight of the rear dredger and with the wide reach to the rear to damage the hydraulics (bent sub-steering, broken upper handle holder, etc.). The three-point stiffening makes the excavator and the tractor a compact unit. Thus, vibrations, wobbling and twisting are excluded. The excavator is stable on its hydraulically extendable supports.

The backhoe is designed for the rear three-point hitch KATI.

The drive of the digger is via PTO shaft, which is permanently mounted on excavator. This rear actor has an internal oil circuit with oil tank and PTO pump.

The PTO shaft is included.

The oil in the storage tank is not filled because such large amounts of oil are not allowed to remain in the machine during transport, for environmental reasons.
Depending on the backhoe type you have to refill 5-10 liters standard hydraulic oil 46S.

The drive tractor should have a minimum weight of 650 kilograms, because the rear actor is already 250 kg heavy itself. Otherwise, the weight ratio is wrong.

Important NOTE!!! There must be no play between the bolt and the holder!







 

We guarantee a serious carrying out. You have a full right of return.

Specifications

  • Shovel / bucket length: 31 cm
  • Shovel width inside/Panel width: 30 cm
  • Shovel arm Total length: 245 cm
  • Drive of the digger is via the tractor PTO
  • Dimensions in transport position (LxWxH): 1400 x 1150 x 1700 mm
  • max. Working depth: 95 cm
  • max. Working radius: 230cm
  • max. Lifting height: 210 cm
  • Rotation angle: 180 °
  • Bucket angle: 160 °
  • Bucket capacity: 0.01 m3
  • Lifting capacity: 1500 kg
  • Weight: 250 kg



ATTENTION!
Please shorten the PTO shaft to required length.






Rotationpoint












 

The following buckets/shovels are available:

Three buckets are optionally available for the backhoe HB15. These have the same shape and differ only in the width and the number of digger teeth.

1. basic form


This is the standard bucket.
This is fitted as standard on the excavator.

2. optional types


Image 1:        3 digger teeth - 299 EUR

( This is the standard bucket.
This is fitted as standard on the excavator. )




Image 2:     4 digger teeth - 350 EUR

Image 3:          Grave tines - 410 Euro

Image Number of teeth bucket width B bucket capacity
1 3 30 cm 0,017 m3
2 4 40 cm 0,022 m3
3 without 60 cm 0,040 m3

SUPPLIERS DECLARATION for components

We hereby declare that the product is designed for mounting in or on a machine.

The machine in which the above-mentioned part is to be installed, should not be put into operation until it was found that the machine complies with the requirements of the Machinery Directive.

Any damage arising therefrom is not chargeable by Motorgeräte Fritzsch GmbH. Motorgeräte Fritzsch GmbH disclaims any liability for damages, because we have no influence on installation, use and safety of the machine.

For Diesel Engines: As none of the major manufacturers give warranty / statutory warranty rights in the use of vegetable oil for diesel engines, we hereby join in this scheme.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Log gripper complete package rotator tongs holder control valve and hoses for installation

Log gripper complete package rotator tongs holder control valve and hoses for installation

1.500,00 EUR (19 % VAT incl. * Shipping information)

This Product was added to our catalogue on Wednesday 23 November, 2016.

Parse Time: 0.200s