
Due to the absolutely stable processing we offer lifetime warranty against bending of the excavator arms. In case of damage we will send free the relevant arm.
The backhoe for tractors may be assembled to each tractor. Three-point excavators are for private and professional use.
This is a very solid Backhoe - the material has not been saved. These excavators we sell since 2008.
The backhoe is designed for the rear three-point hitch and KATI.
This rear actor has an internal oil circuit with oil tank and PTO pump.
The oil in the storage tank is not filled because such large amounts of oil are not allowed to remain in the machine during transport, for environmental reasons.
Depending on the backhoe type you have to refill 5-10 liters standard hydraulic oil 46S.
The PTO pump is driven by the supplied PTO shaft.
The drive tractor should have a minimum weight of 700 - 800 kg, because the rear actor is already 450 kg heavy itself. Otherwise, the weight ratio is wrong.
The PTO pump is connected directly to the tractor.
Specifications
• Shovel / bucket length: 55 cm
• Shovel width inside: 31 cm
• Shovel arm Total length: 246 cm
• Drive of the digger is via the tractor PTO pump
• Dimensions in transport position (LxWxH): 1700 x 1500 x 1200 mm
• max. Working depth: 185 cm
• max. Working radius: 450cm
• max. Lifting height: 220 cm
• Rotation angle: 140 °
• Bucket angle: 160 °
• Bucket capacity: 0.020 m3
• Lifting capacity: 290 kg
• Weight: 450 kg
We guarantee a serious carrying out. You have a full right of return.












The excavator thumb is included in the standard delivery. Thus, you can lift tree stands, stones, fence pots, etc.
We also offer a complete retrofit kit - a timber grab / Log gripper for attachment to the backhoe - an inexpensive alternative!