HB22S with side shift suitable for small tractors
This is a very solid Backhoe - the material has not been saved. These excavators we sell since 2008.
The backhoe for tractors may be assembled to each tractor. Excavator with side shift, three-point excavators are for private and professional use.
Important!!! Each ot our rear Dredges has a three-point stiffener (standard)!
The rear dredger is thus firmly connected to the tractor. This means that lifting and lowering with the rear three-point lifting is no longer possible.
Due to the dead weight of the rear dredger and with the wide reach to the rear, damage to the hydraulics would occur (bent sub-brakes of broken-out upper steering brackets, etc.).
The three-point stiffening makes the excavator and the tractor a compact unit.
Thus, vibrations, wobbling, and distortions are excluded.
The excavator is stable on its hydraulically extendable.
The backhoe is designed for the rear three-point hitch and KATI KATII.
Specifications
- Shovel / bucket length: 50 cm
- Shovel width inside: 30 cm
- Shovel arm Total length: 250 cm
- Sideshift 1,19m
- Drive of the digger is via the tractor PTO
- Dimensions in transport position (HxWxL): 1600 x 1000 x 1700 mm
- max. Working depth: 155 cm
- max. Working radius: 280cm
- max. Lifting height: 270 cm
- Rotation angle: 180 °
- Bucket angle: 203 ° opening angle
- Bucket capacity: 0.01 m3
- Shovel power: 1500 kg
- Weight: 520 kg
- Pump capacity: 40 liters per minute
- Clear dimension of the metal transport box LxWxH 140 x 110 x 160 cm
ATTENTION!
Please shorten the PTO shaft to required length.
We guarantee a serious carrying out. You have a full right of return.
Important Note!!! There must be no play between the bolt and the holder!
sideshift 1,19m
Due to the absolutely stable processing we offer lifetime warranty against bending of the excavator arms. In case of damage we will send free the relevant arm.
External dimension stabilizer foot to foot support 1,25m
External dimension framework 1,20m
The excavator arm can be hydraulically side-shifted 1,19m.
Side shift is good if you need to dredging a trench right next to a house wall.
The drive of the digger is via the PTO shaft of the tractor. This rear actor has an internal oil circuit with oil tank and PTO pump.
The PTO pump is driven by the supplied PTO shaft.
The oil in the storage tank is not filled because such large amounts of oil are not allowed to remain in the machine during transport, for environmental reasons.
Depending on the backhoe type you have to refill about 25 liters standard hydraulic oil 46S.
The PTO pump is connected directly to the tractor.
A: 255cm B: 155cm C: 270cm
Fixed-locked excavator
This is the standard blade with 3 tines. This is mounted on the excavador as standard.
Standard blade with 3 tines
2. Optimal types
Image 1: 3 grave tines - 299 Euro
standard scoops - included as standard
Image 2: 5 grave tines - 390 Euro
Image 3: grave spoon - 430 Euro
| Image |
Number of tines |
Panel width |
Shovel volume |
| 1 |
3 |
30 cm |
0,017 m3 |
| 2 |
5 |
50 cm |
0,020 m3 |
| 3 |
without |
70 cm |
0,050 m3 |
