English Deutsch

excavator earthmover digger backhoe HB24S rear actor for tractor three-point linkage with log gripper digger bucket and side shift

excavator earthmover digger backhoe HB24S rear actor for tractor three-point linkage with log gripper digger bucket and side shift
Product no.: HB24S+Holzgreifer

5.480,00 EUR   19 % VAT incl.

Shipping inside Germany: 150,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

2 years warranty + 1 year MGF parts warranty!


excavator earthmover digger backhoe HB24S rear actor for tractor three-point linkage with log gripper digger bucket and side shift Item is temporarily not available!

 

Rear digger, Backhoe HB24S with side shift,
log gripper and digger bucket
suitable for small tractors

This is a complete package consisting of a very solid backhoe HB24S fully assembled with 3tooth bucket and a log gripper with rotator for the backhoe. All hydraulic hoses and control valve are installed and fully functional.

The backhoe for tractors may be assembled to each tractor. Excavator with side shift, three-point excavators are for private and professional use.

The backhoe is designed for the rear three-point hitch and KATI KATII.

The drive of the digger is via the PTO shaft of the tractor. This rear actor has an internal oil circuit with oil tank and PTO pump.

The PTO pump is hooked into the existing rear PTO of the tractor..

The drive tractor should have a minimum weight of 1000 kg, because the rear actor is already 600 kg heavy itself. Otherwise, the weight ratio is wrong.

The oil in the storage tank is not filled because such large amounts of oil are not allowed to remain in the machine during transport, for environmental reasons.

Depending on the backhoe type you have to refill 5-10 liters standard hydraulic oil 46S.

We guarantee a serious carrying out. You have a full right of return.


Backhoe HB24S with log grapple:

Log gripper/log grapple complete package - rotator, tongs, holder, control valve and hoses for installation

The loading tongs has a net weight of 22 kg.

 Specifications - Rotator

  • Rotation: 360°
  • max. statically axial load: 10 KN / 2250 lbf
  • max. dynamic axial load: 5 KN / 1125 lbf
  • Torque at 25 MPa (3625psi): 450 Nm
  • Required oil flow: 10 l/min
  • Opening width: till 70 cm
  • max. load capacity: 1000 kg
  • Net weight: 10 kg


ATTENTION!
Please shorten the PTO shaft to required length.






log grapple in action:



Backhoe HB24S with 3tooth excavator bucket:

Specifications

  • Shovel / bucket length: 60 cm
  • Shovel width inside/Panel width: 30 cm
  • Shovel arm Total length: 290 cm
  • Drive of the digger is via the tractor PTO
  • Dimensions in transport position (LxWxH): 1400 x 1000 x 1700 mm
  • max. Working depth: 195 cm
  • max. Working radius: 280cm
  • max. Lifting height: 317 cm
  • Rotation angle: 180 °
  • Bucket angle: 160 °
  • Bucket capacity: 0.028 m3
  • Shovel power: 1500 kg
  • Weight: 560 kg
  • Pump capacity: 40 liters per minute

A: 290cm  B: 195cm  C: 317cm









side shift is good if you need to dredging a trench right next to a house wall.





The PTO pump is connected directly to the tractor. 

Sorry, the PTO protection, we have omitted it for clarity in photographs - but it is standard included.



The following buckets/shovels are available:

Three buckets are optionally available for the backhoe HB24S. These have the same shape and differ only in the width and the number of digger teeth.

1. basic form


This is the standard bucket.
It is fitted as standard on the excavator.

2. optional types

Image 1: 2 teeth digger - 230 EUR

Image 2: 3 teeth digger - 299 EUR

 

Image 3: 4 teeth digger - 350 EUR

Image 4:           5 theeth digger - 400 Euro

Image 5: digger shovel - 450 EUR

Image 6: digger shovel - 400 EUR

Image Number of tines
Panel width shovel volume
1 2 26 cm 0,014 m3
2 3 30 cm 0,017 m3
3 4 40 cm 0,022 m3
4 5 50 cm 0,028m3
5 without 90 cm

0,061 m3

6 without 70 cm

0,045 m3

 


 


Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Compact Tractor Eurotrack 254E Tractor tractor with front loader 4WD and street legal model 2019

Compact Tractor Eurotrack 254E Tractor tractor with front loader 4WD and street legal model 2019


11.500,00 EUR (19 % VAT incl. * Shipping information)
Tractor Eurotrack 454E 4WD 45HP, new and street legal

Tractor Eurotrack 454E 4WD 45HP, new and street legal


10.400,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Pallet forks for Compact loader HL16 wheel loader

Pallet forks for Compact loader HL16 wheel loader

750,00 EUR (19 % VAT incl. * Shipping information)

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Hay tedder 160Z rotary tedder for tractors

Hay tedder 160Z rotary tedder for tractors
Our previous price 950,00 EUR
Now only 799,00 EUR
you save 16 % / 151,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Information

Gelistet bei TestIt.de

Parse Time: 1.568s