English Deutsch

excavator / earthmover/ digger backhoe HB25S, rear actor for tractor three-point linkage with side shift

excavator / earthmover/ digger backhoe HB25S, rear actor for tractor three-point linkage with side shift
Product no.: HB25S

3.950,00 EUR   19 % VAT incl.

Shipping inside Germany: 230,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

2 years warranty + 1 year MGF parts warranty!

SPECIAL OFFER - You get an excavator shovel of your choice for free! - Take advantage of the offer.


excavator / earthmover/ digger backhoe HB25S, rear actor for tractor three-point linkage with side shift

Rear digger, Backhoe HB25S with side shift suitable for small tractors

This is a very solid Backhoe - the material has not been saved. These excavators we sell since 2008.

The backhoe for tractors may be assembled to each tractor. Excavator with side shift, three-point excavators are for private and professional use.


Each of our rear dreders has a three-point stiffener (standard)!

The rear dredger is thus firmly connected to the tractor.

This means that lifting and lowering with the rear three-point lifting is nos longer possible.

Due to the dead  weight of the rear dredgerand with the wide reach to the rear, damage to the hydraulics would occur ( bent sub-brakes of broken-out upper steering breckets, etc.).

The three-point stiffening makes the excavator and the tractor a compact unit.

Thus, vibrations, wobbling, and distortions are excluded.

The excavator is stable on its hydraulically exendable supports.

The backhoe is designed for the rear three-point hitch and KATI KATII.


  • Shovel / bucket length: 60 cm
  • Shovel width/panel width: 40 cm
  • Shovel arm Total length: 330 cm
  • Sideshift 1,37m
  • Drive of the digger is via the tractor PTO
  • Dimensions in transport position (LxWxH): 1400 x 1000 x 1900 mm
  • max. Working depth: 225 cm
  • max. Working radius: 280cm
  • max. Lifting height: 345 cm
  • Rotation angle: 180 °
  • Bucket angle: 203 ° opening angle
  • Bucket capacity: 0.028 m3
  • Bucket power: 1700 kg
  • Weight: 860 kg
  • Pump capacity: 40 liters per minute
  • Hydraulic pressure 160 bar
  • Clear dimension of the metal transport box LxWxH 160 x 110 x 230 cm

Please shorten the PTO shaft to required length.

We guarantee a serious carrying out. You have a full right of return.

Important Note!!! There must be no play between the bolt and the holder.

Anbaubagger für Kubota

Due to the absolutely stable processing we offer lifetime warranty against bending of the excavator arms. In case of damage we will send free the relevant arm.
Seitenverschub Bagger

External dimension stabilizer foot to foot support 1,55m

Heckbagger für Trecker und Schlepper

External dimension framework 1,45m

The excavator arm can be hydraulically side-shifted 1,37m.


Side shift is good if you need to dredging a trench right next to a house wall.

The drive of the digger is via the PTO shaft of the tractor. This rear actor has an internal oil circuit with oil tank and PTO pump.

The PTO pump is driven by the supplied PTO shaft.

The oil in the storage tank is not filled because such large amounts of oil are not allowed to remain in the machine during transport, for environmental reasons.

Depending on the backhoe type you have to refill about 25 liters standard hydraulic oil 46S.

The 4-pronged blade (40 cm wide) is included.

The PTO pump is connected directly to the tractor.

Sorry, the PTO protection, we have omitted it for clarity in photographs - but it is standard included.

The drive tractor should have a minimum weight of 1000 kg, because the rear actor is already 860 kg heavy itself. Otherwise, the weight ratio is wrong.

The excavator is pivotable 180 °.

A: 330cm  B: 225cm  C: 345cm

The following buckets/shovels are available:

Three buckets are optionally available for the backhoe HB25S. These have the same shape and differ only in the width and the number of digger teeth.

1. basic form

This is the standard bucket.
This is fitted as standard on the excavator.

2. optional types

Image 1:     2 teeth digger - 230 Euro

Image 2: 3 teeth digger - 299 EUR

Image 3: 4 teeth digger - 350 EUR

Standard bucket - standard included

Bild 4: 5 teeth digger- 400 Euro

Image 5: digger shovel - 450 EUR

Image 6: digger shovel - 400 EUR

Image Number of teeth panel width B bucket capacity
1 2 26 cm 0,014 m3
2 3 30 cm 0,017 m3
3 4 40 cm 0,022 m3
4 5 50 cm 0,028 m3
5 without 90 cm
0,061 m3
5 without 70 cm 0,045 m3

We also offer a complete retrofit kit - a timber grab / Log gripper for attachment to the backhoe - an inexpensive alternative!

Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.


We hereby declare that the product is designed for mounting in or on a machine.

The machine in which the above-mentioned part is to be installed, should not be put into operation until it was found that the machine complies with the requirements of the Machinery Directive.

Any damage arising therefrom is not chargeable by Motorgeräte Fritzsch GmbH. Motorgeräte Fritzsch GmbH disclaims any liability for damages, because we have no influence on installation, use and safety of the machine.

For Diesel Engines: As none of the major manufacturers give warranty / statutory warranty rights in the use of vegetable oil for diesel engines, we hereby join in this scheme.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.598s