English Deutsch

mounted half-turn plough / single-furrow plough PF30 for tractors

mounted half-turn plough / single-furrow plough PF30 for tractors
Product no.: PF30

750,00 EUR   19 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; due to Corona, processing times may take longer

mounted half-turn plough / single-furrow plough PF30 for tractors

The plow is mounted in the rear three-point linkage KAT1.

Reversible plow PF30 with jockey wheel, skimmers and 6x moveable sideways suitable for tractors from 12PS.

The plow is built very strong - the material has not been saved. This confirms the high weight of 110 kg.

The two skimmers are steplessly adjustable. The plow can be adjusted laterally 5 times and rotated from the driver seat.

This plow is equipped with all kinds of technical details. Like e.g. .:

  • In the triangle holder, a ball bearing is installed, which allows you to rotate the turning plow from the seat by means of the lever and the necessary momentum. Many suppliers have incorporated no bearings and thus turning the plow, from the seat is almost impossible.
  • The support wheel folds down depending on the position of the plow.
  • The skimmers are included as a standard.
  • The blades are replaceable.
  • The peg supports are adjustable, that is, when you drive across a slope you can just set the plow. The tractor is therefore in the inclined position and the plow can be set exactly vertical by adjusting the peg supports.

We guarantee a serious carrying out. You have a full right of return.

• 35 cm working width
• 45 cm working depth
• with support wheel
• two Skimmers are adjustable
• 6 times side adjustment
• rotatable from driver's seat
• for tractors from 12PS
• 85 kg

The working depth is 45 cm.

rotatable from driver's seat with this lever

Video PF30:

two support legs

(1) adjustable peg supports
(2) 6-fold lateral adjustment

The plow holder is mounted on ball bearings, thus you can easily turn the plow.

(1) Angle adjustment
(2) rotation mechanism

Adjustment of the plow

movable support wheel



⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.762s