Professional snow plow 1,40m hydraulical for mini tractors
(Kubota, Iseki, Yanmar, Mitsubishi usw.)
The snow plow is designed as a spring damper snow plow, that is if you drive into an obstacle, the shield folds away forward.
The snow plow can be tilted and lifted hydraulically. The pivoting cylinder, control valve and hoses are included.
The control valve has a float position - so you can effectively clear.
That means you can raise and lower the snow plow hydraulically. You can also press it with full pressure down so that the front wheels of the tractor hang 5 cm in the air and thus the whole weight of the tractor is on the snow plow. You can use full pressure to clear away solid snow and packed snow.
Furthermore, a floating position function is integrated in the control block. That means you turn the blade and without pressure. So it is with its own weight on the floor and balances every bump.
The pivoting of the snow plow is fully hydraulically via the control valve - not mechanically via a lever or push-pins.
The holder for the control valve is included, but is designed for Kubota B7001. With slight modifications it also fits other tractors.
As hydraulic drive the existing hydraulic circuit of the tractor is used. The flow-pressure line of the hydraulic circuit is cut and there are two angle-Hermeto closures fitted.
We guarantee a serious carrying out. You have a full right of return.
Specification
• spring damper/flap snow plow 140cm x 40cm
• Clearing width 1,40 m
• hydraulic lifting and hydraulic side pivoting
• with mounting frame, pivoting cylinder, control valve and hoses
Thanks to the adjustable mounting frame, this snow bplow can be attached to any tractor!
Infinitely adjustable sliding skid. Stronger support frame to prevent warping the snow plow.
Here, the control valve is screwed onto the protective plate.
Bayonet locks for quick removal and installation of the snow plow blade.
Plug-in bolts for quick removal and installation of the snow plow.
Video:
