Front snowblower hydraulically SF120H with 120cm working width
Suitable for tractors Kubota Yanmar (old version)
The snow blower is built heavy and solid.
A long discharge chute ensures exact ejection.
The drive of the snow thrower by means of a Rear plug-in PTO pump at 540 rpm or 1000 rpm.
On the PTO of the tractor is plugged a plug-on / arbor-mounted hydraulic pump and in the rear three-point hitch a 20 liter oil tank is mounted.
Thus, the front snowblower is powered by a separate hydraulic circuit.
The chute and the discharge valve are electrically operated, even when it is done here in the image mechanically.
The snowthrower can be individually mounted on the tractor.
This is always an adaptation on the part of the clientele.
Even laterally you could still attach a hydraulic motor which drives the feed roller.
By means of the valve, the working speed can then be adjusted up or down accordingly.
For this, the gear drive must first be disabled.
Everything depends on your tractor and everything has to be adjusted accordingly.
The PTO is not included as standard.
We guarantee a serious carrying out. You have a full right of return.
Specification
- Working width: 120 cm
- Input Height: 60 cm
- Throwing distance: up to 15 m
- Net weight: about 296 kg
(1) hydraulic oil tank; (2) Twist can be mounted in the top link; (3) Plug-in PTO pump
stepless adjustable stabilizer
hydraulic drive of the gearbox
electric fireplace swing
double ejection flap, electrically adjustable
EL joystick control
2-way height-adjustable front dome triangle
4-leaf ejector fan
Front connection plates
Here you can see pictures from a customer from Sweden:
The milling machine works well, can be easily connected and disconnected, the chimney adjustment works perfectly.
Klaus Geidel
93994 Mörttjärn
Sweden
With best regards
Klaus Geidel
Here you can see two pictures and a video of a customer working on wet snow. The snow blower is attached to a Kramer wheel loader.