English Deutsch

Attachment-Sweeper, sweeping roller R80 for single axle tractors KM5 and KM8

Attachment-Sweeper, sweeping roller R80 for single axle tractors KM5 and KM8
Product no.: R80-VG

1.990,00 EUR   16 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

Demonstration device 2h!

Attachment-Sweeper, sweeping roller R80 for single axle tractors KM5 and KM8

• 80 cm working width
• 40 cm brush diameter
• laterally pivotable
• collecting container with brush and side brush

Thus, the entire working width with side brush is 120cm.

We guarantee a serious carrying out. You have a full right of return.

The sweeper can also be supplied without side broom minus Euro 320,00 respectively without waste container Euro 220,00 less.

The sweeper is laterally pivotable.

By means of support wheels the sweeper can be infinitely adjusted.

Immediately available with adapter for walking tractors KM5 and KM8.

It is possible to install this implement via a transmission adapter in nearly all two wheel tractors (for example: Agria, Barbieri, Fort, Goldoni, Bertolini, Nibbi, BCS, Ferrari). Please ask for the price of the compatible adapter to your two wheel tractor.

In Italy there are about 50 walk behind tractors manufacturers. Each manufacturer has its own port, so we will need the information on the nameplate of the two wheel tractor (motor data are uninteresting).

Only then is it possible to get the right adapter. A majority of common adapters we have in stock. For direct orders in Italy, we need an average delivery time of approximately 3 weeks.

Furthermore, we need pictures and measurements from your two wheel tractor connector as follows:

walk behind tractor:

Diameter of the pipe connection or Quickfit connection on walk behind tractor

Sliding sleeve on walk behind tractor:

Number of teeth
(1) Inner diameter of the toothing
(2) outer diameter of the toothing

Screw connector of two wheel tractor:

(1) center to center of the bolt diameter
(2) Inside diameter

Number of teeth
(1) Inner Diameter
(2) outer diameter


(1) Outside diameter of the implement
(2) Distance from center of hole to end of pipe
(3) length of the toothed shaft

Number of teeth
(1) Inner Diameter
(2) outer diameter

Screw connection of the implement:

(1) Inner diameter of the plug sleeve
(2) outer diameter of the plug sleeve

Diameter of the center


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.777s