Tipping trailer trailer HV350 for single-axle payload 350 kg single-axle tractor

We sell these trailers since 2000 and there was never a complaint.

This trailer is built very sturdy and solid.

The trailer skip is welded in whole and can be tilted when it is hitched.

The tailgate is foldable and removable. The tilt angle can be adjusted by means of a chain.

The trailer is equipped with a hand brake.

The payload is 350 kg.

The weight of the trailers is 95 kg.

The chassis consists of generously-sized tubes.

The wheels are mounted on a sturdy tubular frame under the trailer tub. Thus the wheels are not above the outer edge of the skip. The outside width of the trailer is thus 155 cm.

4-Square tubes are welded at the corners of the skip. In these can be inserted tubes for the transport of wood and other materials.

The trailer is assembled in about half an hour.

Supplied with the standard adapter included. But it only fits a Honda F560 / F800 / F810 two wheel tractor.

You have two options - cut the adapter off and weld on an adapter for your two wheel tractor yourself - or send us a drawing of your connection to the two wheel tractor and we produce for you the suitable adapter. Because this is custom made, we need to ask for 100,00 Euros!

trailer coupling:

Please give us the measurements of the hitch of your walk behind tractor! Furthermore, we need the height from floor to center of hitch.

A: Bolt diameter B: Height of hitch C: Outer diameter of the hitch

A: Bolt diameter   B: Height inside   C: Height hitch mid to upper edge and Floor

Dimension bolt middle to the end of the U-profile

We guarantee a serious carrying out. You have a full right of return.

Specification
• Payload: 350 kg
• Net weight: 95 kg
• Skip tiltable
• Tailgate is foldable and removable
• remaining board/side walls are welded firmly
• Wide tires: 145x70-8 (dimensions wheel: 41cm diameter and 13cm wide)
• Box/skip inner dimensions (LxWxH): 1370 x 1200 x 300 mm
• Box/skip outside dimensions (LxWxH): 1435 x 1265 x 300 mm