English Deutsch

Cutter bar with mower drive for walk-behind tractor KM5

Cutter bar with mower drive for walk-behind tractor KM5
Product no.: MB

1.025,00 EUR   19 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Cutter bar with mower drive for walk-behind tractor KM5

Blockage free ESM communal bar of 107 cm in length. Tell us the desired length of the cutter bar.
Convenient blade change by raising the spring lever.
Best cutting results through constant spring pressure on the upper knife
As mowing drive we use a pendulum professional mower drive. The mower drive is via ball-bearing drive elements. The mower drive arm pulls the upper blade back and forth without occuring lateral forces.


Pendulum professional mower
- There are no lateral forces
Eccentric mower
- fast wear of the U profile and of the bearing and
origin of lateral forces that negatively affect the cutting view


The stability and quality of the Italian bar is not very good. We can buy a cheap hobby bar from ESM, but the effort of setting and blade change is very complicated.



As cutter bars we only use ESM communal oscillating lever bars. Although this is the most expensive bar but also the best. By the spring pusher, a uniform pressure from the upper blade is based on the lower blade, and thus the cutting quality is better. If the upper blade need to be changed once, you only need to push spring arm up and lock and the blade/knife can be changed quickly. An elaborate setting of the upper blade is eliminated.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Bar weight for walk-behind / two wheel tractor KM5 and KM8/MAK17S

Bar weight for walk-behind / two wheel tractor KM5 and KM8/MAK17S

49,00 EUR (19 % VAT incl. * Shipping information)
ESM double-knife/blade mower deck with 117cm oscillating lever bar with mower drive for two whell tractor KM5

ESM double-knife/blade mower deck with 117cm oscillating lever bar with mower drive for two whell tractor KM5

1.999,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Snow plow 80cm for walk-behind/two wheel tractor

Snow plow 80cm for walk-behind/two wheel tractor

165,00 EUR (19 % VAT incl. * Shipping information)
Single axle Adriatica Minny with Honda engine 5.6 hp tiller with tiller

Single axle Adriatica Minny with Honda engine 5.6 hp tiller with tiller

1.500,00 EUR (19 % VAT incl. * Shipping information)
walk-behind tractor KM5 7.5PS cultivators

walk-behind tractor KM5 7.5PS cultivators

2.199,00 EUR (19 % VAT incl. * Shipping information)
Tipping trailer trailer HV220 for single-axle payload 300 kg single-axle tractor

Tipping trailer trailer HV220 for single-axle payload 300 kg single-axle tractor

519,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.364s