Dump trailer HV450 for two wheel tractor, load capacity 500 kg

We sell these trailers since 2000 and there was never a complaint.

This trailer is built very sturdy and solid.

It has a solid tube axis, which is able to withstand a short-term overload. The risk for this is on the user.

The trailer skip is welded in whole, reinforced at the sides with gusset plates and can be tilted when it is hitched - a skip that withstand all stresses.

The tailgate is foldable and removable. The tilt angle can be adjusted by means of a chain.

The trailer is equipped with a combined hand and foot brake.

The payload is 500 kg.

The weight of the trailers is 96 kg.

The chassis consists of generously-sized tubes.

The trailer is assembled in about half an hour.

4-Square tubes are welded at the corners of the skip. In these can be inserted tubes for the transport of wood and other materials.

Supplied with the standard adapter included. But it only fits a Honda F560 / F800 / F810 two wheel tractor.

You have two options - cut the adapter off and weld on an adapter for your two wheel tractor yourself - or send us a drawing of your connection to the two wheel tractor and we produce for you the suitable adapter. Because this is custom made, we need to ask for 100,00 Euros!

trailer coupling:

Please give us the measurements of the hitch of your walk behind tractor! Furthermore, we need the height from floor to center of hitch.

A: Bolt diameter B: Height of hitch C: Outer diameter of the hitch

A: Bolt diameter   B: Height inside   C: Height hitch mid to upper edge and Floor

Dimension bolt middle to the end of the U-profile

We guarantee a serious carrying out. You have a full right of return.

Specification
• Payload: 500 kg
• Net weight: 96 kg
• Skip tiltable
• combined hand and foot brake
• Tailgate is foldable and removable
• remaining board/side walls are welded firmly
• Wide tires: 5.00-10 profiliert
• Box/skip inner dimensions (LxWxH): 1400 x 1040 x 300 mm