English Deutsch

Flail mulcher TR60 flail mower for two wheel tractors

Flail mulcher TR60 flail mower for two wheel tractors
Product no.: TR60EA

1.600,00 EUR   16 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder


Flail mulcher TR60 flail mower for two wheel tractors

Because the flail mulcher has a very high power consumption it needs a drive power of 10.0 PS at least to operate the mower.

20 moving Y blades are attached On the knife/blade shaft. The device is ideal for mowing lawns, parks, gardens, etc.. branches, rocks and other obstacles are not a problem because the blades fold away upon impact.

  • Working width: 60 cm
  • Weight: 45 kg



The skids are adjustable.

This flail mower is suitable for slopes.

The ejection flap is adjustable

Immediately available with adapter for walking tractors KM5 and KM8.

It is possible to install this implement via a transmission adapter in nearly all two wheel tractors (for example: Agria, Barbieri, Fort, Goldoni, Bertolini, Nibbi, BCS, Ferrari). Please ask for the price of the compatible adapter to your two wheel tractor.

In Italy there are about 50 walk behind tractors manufacturers. Each manufacturer has its own port, so we will need the information on the nameplate of the two wheel tractor (motor data are uninteresting).

Only then is it possible to get the right adapter. A majority of common adapters we have in stock. For direct orders in Italy, we need an average delivery time of approximately 3 weeks.

Furthermore, we need pictures and measurements from your two wheel tractor connector as follows:

walk behind tractor:


Diameter of the pipe connection or Quickfit connection on walk behind tractor

Sliding sleeve on walk behind tractor:


Number of teeth
(1) Inner diameter of the toothing
(2) outer diameter of the toothing

Screw connector of two wheel tractor:


(1) center to center of the bolt diameter
(2) Inside diameter


Number of teeth
(1) Inner Diameter
(2) outer diameter

Implement:


(1) Outside diameter of the implement
(2) Distance from center of hole to end of pipe
(3) length of the toothed shaft


Number of teeth
(1) Inner Diameter
(2) outer diameter

Screw connection of the implement:


(1) Inner diameter of the plug sleeve
(2) outer diameter of the plug sleeve


Diameter of the center

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Customers who bought this product also bought the following products:

Combined walk-behind tractor KM5 13,0PS walk-behind tractors, two-wheel tractors, tractors, agricultural, implements, combination single-axle cultivators

Combined walk-behind tractor KM5 13,0PS walk-behind tractors, two-wheel tractors, tractors, agricultural, implements, combination single-axle cultivators

2.699,00 EUR (16 % VAT incl. * Shipping information)
Equipment frame with goose feet and L-shaped blades

Equipment frame with goose feet and L-shaped blades

576,00 EUR (16 % VAT incl. * Shipping information)
Lattice wheels for two wheel tractor KM5

Lattice wheels for two wheel tractor KM5

360,00 EUR (16 % VAT incl. * Shipping information)
walk-behind tractor KM5 13,0PS with tiller 70cm cultivators

walk-behind tractor KM5 13,0PS with tiller 70cm cultivators

3.440,00 EUR (16 % VAT incl. * Shipping information)
Parse Time: 0.790s