Plow angle plow hawk rotary plow cultivation plow ram for two wheel tractor new

Product no.: Scarabeo

1.490,00 EUR   19 % VAT incl. Shipping inside Germany: 85,00 EUR *     * Shipping information Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

The rotary plow makes it possible to combine 2 operations. The soil is ripped up and the soil is crushed at the same time. The seed can be immediately placed in the finished furrow. Furthermore, the grass does not need to be cut. It is crushed at the same time.

The rotary plow can be mounted on single-axle tractors with a power of 8 hp or more.

Technical data
- Working width: 300 mm
- Working depth approx. 250 mm
- Weight: 50 kg
- Dimensions (LxWxH): 696 x 523 x 735 mm
- Gearbox: bevel gearbox in oil bath

Immediately available with adapter for walking tractors KM5.

It is possible to install this implement via a transmission adapter in nearly all two wheel tractors (for example: Agria, Barbieri, Fort, Goldoni, Bertolini, Nibbi, BCS, Ferrari). Please ask for the price of the compatible adapter to your two wheel tractor.

In Italy there are about 50 walk behind tractors manufacturers. Each manufacturer has its own port, so we will need the information on the nameplate of the two wheel tractor (motor data are uninteresting).

Only then is it possible to get the right adapter. A majority of common adapters we have in stock. For direct orders in Italy, we need an average delivery time of approximately 3 weeks.

Furthermore, we need pictures and measurements from your two wheel tractor connector as follows:

walk behind tractor:

Diameter of the pipe connection or Quickfit connection on walk behind tractor

Sliding sleeve on walk behind tractor:

Number of teeth
(1) Inner diameter of the toothing
(2) outer diameter of the toothing

Screw connector of two wheel tractor:

(1) center to center of the bolt diameter
(2) Inside diameter

Number of teeth
(1) Inner Diameter
(2) outer diameter

Implement:

(1) Outside diameter of the implement
(2) Distance from center of hole to end of pipe
(3) length of the toothed shaft

Number of teeth
(1) Inner Diameter
(2) outer diameter

Screw connection of the implement:

(1) Inner diameter of the plug sleeve
(2) outer diameter of the plug sleeve

Diameter of the center

⇒ Typing errors, misapprehensions and changes excepted.

top