English Deutsch

Sickle mower M72 for two wheel tractors / walking tractors

Sickle mower M72 for two wheel tractors / walking tractors
Product no.: M72

850,00 EUR   19 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Sickle mower M72 for two wheel tractors / walking tractors

No matter how high the grass is, with this mower there is no stopping. The power is transmitted via gear wheels (in oil bath).

The gearbox is very sturdy.

On the blade body 2 movable knife blades are fixed, so the blades fold away in case of obstacles.

As only wear part the knife or blade can be considered.

MADE IN ITALY.

We guarantee a serious carrying out. You have a full right of return.

Specification

  • working width: 72 cm
  • minimum recommended power: from 7,5 PS
  • stepless cutting height adjustment: up to 7 cm
  • Weight: 56 kg
  • Dimensions mounted (LxWxH): 110 x 80 x 45 cm
  • Dimensions packed / Box (LxWxH): 95 x 84 x 35 cm


4cm stepless height adjustment


Knife blades are 7mm thick


stable agricultural gearbox

The respective adapter for KM5 and KM8 is included.

Immediately available with adapter for walking tractors KM5 and KM8.

It is possible to install this implement via a transmission adapter in nearly all two wheel tractors (for example: Agria, Barbieri, Fort, Goldoni, Bertolini, Nibbi, BCS, Ferrari). Please ask for the price of the compatible adapter to your two wheel tractor.

In Italy there are about 50 walk behind tractors manufacturers. Each manufacturer has its own port, so we will need the information on the nameplate of the two wheel tractor (motor data are uninteresting).

Only then is it possible to get the right adapter. A majority of common adapters we have in stock. For direct orders in Italy, we need an average delivery time of approximately 3 weeks.

Furthermore, we need pictures and measurements from your two wheel tractor connector as follows:

walk behind tractor:


Diameter of the pipe connection or Quickfit connection on walk behind tractor

Sliding sleeve on walk behind tractor:


Number of teeth
(1) Inner diameter of the toothing
(2) outer diameter of the toothing

Screw connector of two wheel tractor:


(1) center to center of the bolt diameter
(2) Inside diameter


Number of teeth
(1) Inner Diameter
(2) outer diameter

Implement:


(1) Outside diameter of the implement
(2) Distance from center of hole to end of pipe
(3) length of the toothed shaft


Number of teeth
(1) Inner Diameter
(2) outer diameter

Screw connection of the implement:


(1) Inner diameter of the plug sleeve
(2) outer diameter of the plug sleeve


Diameter of the center

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.918s