English Deutsch

Small round baler CAEB MP550, straw press for two wheel tractors from 13PS KM5 or KM8/MAK17S

Small round baler CAEB MP550, straw press for two wheel tractors from 13PS KM5 or KM8/MAK17S
Product no.: MP550

13.000,00 EUR   19 % VAT incl.

Shipping inside Germany: 150,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

Alignment is possible for almost every single-axle car!

Small round baler CAEB MP550, straw press for two wheel tractors from 13PS KM5 or KM8/MAK17S

attachment round baler CAEB MP550

This round baler can be connected to any large two wheel tractor from 13.0ps.

Please indicate the type of your two wheel tractor if you are interested or have purchased so that we can request the appropriate adapter from the manufacturer.

This  MOUNTAINPRESS was designed for farmers in mountain areas who require agile, safe and highly professional machines.  With its low center of gravity tipping is almost impossible.

Because of the small outside dimensions, it is ideal for small areas where the large technique can not be used.

About every 40 seconds the machine produces a hay bale that weighs around 22 kg.

The formation of (mini) hay bales of any kind is known as soft-hearted, because the ball heart is less pressed to allow the hay a correct transpiration and to prevent a possible mold growth.

The outside is much denser pressed to produce a water-repellent self sparing hay layer around the round bale.

Pressing is done without cutting and threshing, to preserve the original quality of the hay.

Due to its handy size the hay bales are ideal for horse owners and horse farms, etc.

We are CAEB Key distributor Germany.

We guarantee a serious carrying out. You have a full right of return.


  • Suitable for two wheel tractors from 13.0 PS
  • Power Requirements: 6.6 to 14.8 kW
  • Ball Dimensions: 55 x 52 cm
  • Weight of hay bales produced 20-25 kg
  •                   Straw bales 14-18 kg
                      Silage bales 30-50 kg
  • Hour production / Capacity: 50-80 pcs
  • collecting width: 700-1050 mm
  • Teeth of the pickup intake: 16 double teeth
  • Tying with mesh: standard
  • Signal for bale formation: Optional
  • Chain protection coupling: standard
  • Length: 1650-2500 mm
  • Total weight with operating equipment: 300 kg
  • Tires: 3.50-8 4PR
  • min. Working speed of the machine: 2.5 km / h

After consultation with our customers, who have already purchased a machine from us, we can give you a reference.

Here is the video of a customer:


CAEB is the only manufacturer who produces such a small baler !!

folded down swath-wheels

folded up swath-wheels

(1) Hand lever to open the bale removal
(2) support

Connecting to the walk-behind tractor

(1) lever for raising and for lowering the rollers
(2) Handlebar

parking brake


  •     automatic chain lubrication
  •     Brake for front wheels
  •     Silage bale-wrapping machine
  •     windrow wheel pair

Customer image of foliage press:


Immediately available with adapter for walking tractors KM5 and KM8.

It is possible to install this implement via a transmission adapter in nearly all two wheel tractors (for example: Agria, Barbieri, Fort, Goldoni, Bertolini, Nibbi, BCS, Ferrari). Please ask for the price of the compatible adapter to your two wheel tractor.

In Italy there are about 50 walk behind tractors manufacturers. Each manufacturer has its own port, so we will need the information on the nameplate of the two wheel tractor (motor data are uninteresting).

Only then is it possible to get the right adapter. A majority of common adapters we have in stock. For direct orders in Italy, we need an average delivery time of approximately 3 weeks.

Furthermore, we need pictures and measurements from your two wheel tractor connector as follows:

walk behind tractor:

Diameter of the pipe connection or Quickfit connection on walk behind tractor

Sliding sleeve on walk behind tractor:

Number of teeth
(1) Inner diameter of the toothing
(2) outer diameter of the toothing

Screw connector of two wheel tractor:

(1) center to center of the bolt diameter
(2) Inside diameter

Number of teeth
(1) Inner Diameter
(2) outer diameter


(1) Outside diameter of the implement
(2) Distance from center of hole to end of pipe
(3) length of the toothed shaft

Number of teeth
(1) Inner Diameter
(2) outer diameter

Screw connection of the implement:

(1) Inner diameter of the plug sleeve
(2) outer diameter of the plug sleeve

Diameter of the center


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.579s