English Deutsch

Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine

Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine
Product no.: B2.1-13,0PS-Honda-GX390

2.990,00 EUR   19 % VAT incl.

Shipping inside Germany: 90,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine


(Sweeper not included)

The universal two-wheel-tractor which leaves nothing to be desired - whether for sophisticated private use or commercial gardening and landscaping.

The robust construction and the various implements allow it to be a reliable and safe help.

The two wheel tractor is produced in Italy as 90% of all combination units. From there, the devices are sold worldwide - in different colors, versions, engines, spar and sticker

Since 1997, we buy from this company two-wheel-tractors, which we sell retail and wholesale.

Thus we know the pros and cons of the units. In which area do you work best with which equipment we can evaluate at best.



Gear damage, and serious engine damage never occurred. Typically, a Bowden cable, a spark plug or a air filter get broken. But that"s it!

We can deliver spare parts quick and easy.

As major advantage we see the compact design of the machine. The engine is flanged directly via a powerful clutch to the gearbox. To the end of the gear unit a large-sized quick release fastener is screwed where all the implements can be changed quickly without tools. This is an important advantage compared to the Japanese manufacturers of two wheel tractors, they implement the transmission of power through V-belts.

Special Features: As an important wear part, the clutch is a reinforced multi-plate clutch disc, fitted as standard from the factory. We could have let them install also a cheaper cone clutch, but the service life of these clutches is very limited when the clutches are used with tillers / snowblowers or rotary mowers.



This is the multi-plate clutch with 4 single clutch discs.


Here is the comparison between the two clutch inserts - once the small contact surface of the cone clutch (right) and in turn the significantly higher contact surface the multiple disc clutch (left).


cone clutch

The walkbehind tractor is ready for use and complete assembled, it will be delivered on a disposable pallet. You just need to remove the stretch film, refuel petrol and off you go.

We sell only products, which even have been extensively tested and found to be good.

We guarantee a serious carrying out. You have a full right of return.

Specification

  • electronic ignition
  • 9,6& kW/13,0 PS easy-start Honda Motor GX390 with 389 ccm
      max. power at 3600 rpm
  • heavy-duty, durable multi-plate disc clutch
  • 3 forward and 3 reverse gears
  • Reverse gear (quick switching from forward to reverse)
  • differential and lock
  • solid hitch
  • Quick spar adjustment
  • independent drum brakes, single acting as a steering brake on each wheel
  • Included: - agricultural 5.00x10 tires with rim exchange
    - the wheel base can be adjusted 2x
    - Quick-change connector and hitch for the single axle trailer

Video KM5 at work
(mounted implements not included):


Speed ​​of the walkbehind tractor

Every walkbehind tractor can be supplied on request with a electric starter set, battery and battery holder for a surcharge of 350,00 €.

For an additional charge we can supply the walkbehind tractor with a trailer equipped road leagal.



 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Lattice wheels for two wheel tractor KM5

Lattice wheels for two wheel tractor KM5

360,00 EUR (19 % VAT incl. * Shipping information)
Lattice wheels 52cm for two wheel tractor KM5

Lattice wheels 52cm for two wheel tractor KM5

299,00 EUR (19 % VAT incl. * Shipping information)
Potato harvester, vibrating-harvester for two wheel tractor KM5 from 8PS

Potato harvester, vibrating-harvester for two wheel tractor KM5 from 8PS

1.950,00 EUR (19 % VAT incl. * Shipping information)

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Hay tedder FM410 with windrowing rotary tedder for tractors - light rusting -

Hay tedder FM410 with windrowing rotary tedder for tractors - light rusting -
Our previous price 4.350,00 EUR
Now only 3.800,00 EUR
you save 13 % / 550,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Last viewed:

Heated tractor cab for Yanmar GK160

Heated tractor cab for Yanmar GK160
Our previous price 3.800,00 EUR
Now only 2.600,00 EUR
you save 32 % / 1.200,00 EUR
19 % VAT incl. * Shipping information
Features:
Implements
More information on your personal page

Information

Gelistet bei TestIt.de

Parse Time: 0.854s